Pirates, Drugs and Temples

Pirate Bokeh

A detail of the Xmast Tree from Gabriela’s

Leica M6 – C Biogon 35mm at f2,8 – 1/4 sec – Ilford HP5+ 400 – D76, 1:1

Friday Service

A nearby temple. People rarely comes by although several foreign missioners visit it every year…

It reminds me of Roque Dalton’s poem:

Victoria Divina
Esto de los Testigos de Jehová
está super jodido
porque después vendrán
los jueces de Jehová
los fiscales de Jehová
los cuilios de Jehová
los Guardias Nacionales de Jehová
y nos tomarán entre todos
la declaración extrajudicial de Jehová
Para no hablar todavía
del CONDECA de Jehová
y luego los marines de Jehová
y los bombardeos estratégicos de Jehová
más conocidos con el nombre de
Armagedón.

Leica M6 – Summicron 50mm f2,0 – Arista Plus 100

Pharmacy and Loneliness

A fair view of the new Medicine Law.

Leica M6 – Zeiss C Biogon 35mm f 2,8 – Acros 100

Advertisements

Leaked Light

When you are inexperienced in the arts of self developing (or you are not paying attention to what you are doing), you may ruin a film.

This is the result of such a problem, for some reason I got distracted (maybe I was too tired to be developing film) and I barely open the tank top lid.

Moral: Develop film requires your full attention, do not attempt it if you are too tired or are not in the mood of it. Remember you need patience and discipline to do it right.

The film was my last Neopan 400 pushed to 1600. Shot on a Leica M6 – Nokton 50mm f1,5

Notice the white traces, the heavy grain and the lack of definition

Faux lenses

Morning – Breakfast

White traces

Sign Promenade

Bus Stop 

My name is Jean

Developing your own film – A bought experience – Pt. 3

The Developing Process

Things to keep in mind:

  • Determine is the amount of chemicals you will be using. Since I am using a single reel tank I use about 300ml of each chemical in the process
  • Keep all the chemicals at hand
  • The process follows a strict order, if you change it the film will be ruined
  • Chemicals act upon their contact with film, each chemical will work for a specific amount of time on the film.
  • All chemicals must be used at a similar temperature, a +/- 5 degrees Celsius difference is allowed.
  • Agitation is important, it must be done firmly but gently, you are not mixing a drink after all. I agitate as follows: turn the tank upside down twisting it counter-clockwise as you do it: i.e. you hold the bottom of the reel with your right hand and the top with the left hand facing to the 3 clock direction.
  • Each film must use its own recipient, I use beakers measured in ml


The Developing process consist of the following steps:

  1. Developer
  2. Stop bath
  3. Fixer
  4. Hypo Clearing Agent
  5. Final Wash
  6. Wetting Agent
  7. Drying

Developer

Once we have mixed the D76 components as stated in Part 2 of this series, we will have a working solution. This working solution is ready to be used on film. However this working solution may be diluted in water at a 1:1 or 1:3 ratio (that is 1 part of working solution and 1 or 3 parts of water). The use of a diluted developer will depend on the film you are using (not every film allows a diluted D76 developer, specially if you are push processing the film).

What is push processing?

Most black and white film – some more than others- have a wide latitude, that is they may be used one, two or even 3 stops higher that its specified speed. The speed of film is stated at an average ISO value, however this value is only a recommended speed in order to measure the exposure, for example some people state that TriX real ISO is 320 and consequently they expose it and process it at such speed.

TriX and HP5+ have a nominal speed of ISO 400, but they may be “pushed” to ISO 800 (1 stop), 1600 (2 stops), or 3200 (3 stops).  When pushing a film, two elements come into play: the exposure and the development time, therefore you need to expose the film at the desired speed and then develop it as if it where of such speed.

The rule of thumb when push processing is to increase the developing time 15% – 20% per stop increase.

There downsize of pushing a film is that you lose detail, resolution or sharpness in the image, since a pushed film tends to have more grain than if it were exposed and developed at its nominal speed.

Why to dilute the Developer?

A more diluted developer works at a slower rate on film, therefore it built the grain more slowly on the negative, as a consequence you get a reduction in the physical grain size and a reduction in the overall grain of the negative.This comes handy when pushing film because it compensate the reduction of the film’s resolution.

The process

  • Open the small lid of the tank and pour the Developer. Close it.
  • Agitate 5 – 7 times every 5 seconds for 30 seconds.
  • Agitate 5-7 times in 5 seconds every 30 seconds (Kodak Method) or Agitate 10 – 12 times in 10 seconds every minute (Ilford Method)
  • Start to pour out the Developer 10 seconds prior the end of the developing time
  • Dispose the Developer after use

Developing Time

You may find the developing times at different temperatures for Kodak TriX 400 here and the Ilford HP5+ here

In my case, I always use a diluted D76 1:1 and my chemicals are often at 20 C, therefore my times are:

  • TriX at 400  = 9 min 75 sec
  • TriX at 1600 = 13 min 25 sec

Stop Bath

  • Open the small lid of the tank and pour 300 ml of water. Close it.  Use bottled water, do not use tap water is possible.
  • Agitate 15 times, pour out the water
  • Repeat 4 times

Fixer

Fixer is the second most important part of the process. Fixer is used in its working solution and it may be reused, 1 liter of fixer may be used for around 20 films, after that it is said that the Fixer is exhausted.The more you use the fixer the longer you should leave it to fix. I fix for 6 minutes the first 5 rolls and increase the fixing time for 1 minute every 5 rolls until 20 rolls have been fixed, then I dispose the Fixer and prepare a new batch.

  • Open the small lid of the tank and pour 300 ml of Fixer. Close it.
  • Agitate 3 times for 3 seconds every 30 seconds
  • Fix for 6 minutes
  • Pour the fixer back

Hypo Clearing Agent

The HCA is prepared in a stock solution, it must be diluted in a 1:4 proportion.

  • Open the small lid of the tank and pour 300 ml of diluted HCA. Close it.
  • Leave it for 2 minutes. Agitate 5 times at the end of the first minute

Final Wash

For the final wash I use the Ilford Method with a couple of amendments.

  • Open the small lid of the tank and fill it in with bottled water and invert the tank 5 times, pour out the water
  • Fill in the tank with fresh bottled water and  invert the tank 10 times, pour out the water
  • Fill in the tank with fresh bottled water and  invert the tank 20 times, pour out the water
  • Fill in the tank with distilled water and  invert the tank 40 times, pour out the water

Wetting Agent

  • The film is no longer sensitive to light so you may now open the tank.
  • Fill the tank with distilled water and put 1 drop of wetting agent (I use Johnson baby shampoo)
  • Leave it for 2 minutes. At the end of the time agitate it a little and pour out the water.
  • If there are traces of soap bubbles, fill the tank with bottled water and rinse the film.

Drying.

After washing hang up the film in a dry place free of dust. Let the film dry for 2 hours, you may then cut it and place it in a protective film sleeves.

You may wipe the film with a film squeegee. This is not recommended since you may scratch the negative, but if you do it, first soak the squeegee in water and then wipe the film.

Developing your own film – A bought experience – Pt. 2

B.    The Chemicals

Chemicals come in powder or liquid presentations. It is said that liquids are easier to use since you only have to dilute them in the specific proportions required by your film. However, due to transport and access limitations, I have only used the powder presentations.

The chemicals that you require to develop film are the followings:

  • Developer. The developer converts the latent image to metallic silver,  that is it brings out the latent image from the negative. This is the most important element of the process, the developer you chose may exploit the best of the characteristics of your film or it can totally ruin it. There are many choices for developer, but as a starting point you can’t go wrong with Kodak D-76, this is a very versatile developer that has been around for decades and almost any normal purpose film may be developed with D-76. Other developers can provide better results but this one comes in powder presentation, therefore it was my first choice. Later you may try Xtol, which also comes in powder presentation as well, but I have not yet fully tried it to the extent to give a proper opinion. For starters I would buy Kodak and not third party developers, there are a lot of “D-76 like” developers but the price difference is minimal.
  • Fixer. The fixer makes the image permanent and light-resistant by dissolving any remaining silver halide salts, in other words as it’s name implies it “fixes” the image brought out by the developer from the negative. As in developers there are many options to choice from when it comes to fixers, but they mostly come in liquid presentations. For me there only option was Kodak Fixer because it comes in powder presentation. I have also tried a Fixer from Foma but my local supplier ran out of stock, so I bought a 5 gallon pack of Kodak fixer at the same price I acquired 1 litter of Foma Fixer. I have read from many sources that one fixer or another won’t make any difference in your negatives. This is true to a certain extent, just read the recommendations of the film manufacturer, for example while developing efke films it is recommended the use of non hardening fixers.
  • Hypo Clearing Agent. Abbreviated HCA, it helps to wash out the film from any residual chemicals. If a HCA is not used, some films may present a tint dye purple or pink. Any HCA will do the job. Kodak’s HCA comes in powder.
  • Wetting Agent. This helps to a uniform drying and to eliminate drying marks such as water spots; applying a wetting agent will make the water to slip through the film when you hang it to dry. It rinses the film at the final step, it does helps a lot.
  • Distilled Water. This is not a chemical but it is of outmost importance for mixing the ones above referred, also it will be of great help during the final wash of the film.


Tips on mixing the Chemicals

Mixing powder chemicals requires patience and to follow some security measures.

Items required:

  • A ventilated place
  • Latex Gloves
  • Mouth mask
  • Measured Beaker
  • Thermometer
  • Distilled Water
  • A mixer (glass preferred)
  • The Powder Chemical

The two principal elements that you require are the chemical and the water where you will dilute the chemical.

The importance of the distilled water: distilled water is des-mineralized, tap water and bottled water comes with high to low levels of minerals depending on where you live, this is called “hard water”. I found out that in El Salvador neither tap water nor bottled water is apt for mixing chemicals; many people in other countries with less “hard water” use distilled water for mixing the chemicals.

It is recommended that you heat up the distilled water to 50 C for an easier dilution. If you are making a gallon, heat up 1 litter pour it into the beaker and then pour in the whole chemical package mix. Here comes patience comes to play, you need to stir gently for whatever time is needed to dissolve the powder, if after 10 minutes it does not dissolve what I do is I pour the entire beaker content (liquid and non dissolved powder) into the gallon jug where the rest of the distilled water is, mix it gently and the whole thing will be dissolved in a couple of minutes.

After mixing the chemicals is always wise to let them rest for a day; I usually mix them at night and check them in the morning. Keep the mixed chemicals in air tight containers otherwise they will get depleted very soon. I use plastic containers to keep the large batch and small glass containers to actually use during the developing process.

Next: The Developing Process

Developing your own film – A bought experience – Pt. 1

My grandmother used to say “experiences are bought”; which means that to learn something requires time, effort and more often than not money.  This statement is even more valid when there is no one to teach you or somewhere to go and experiment, as it is the case of developing black and white film in El Salvador where allegedly there is only one university lab that still does so and only two small photo studios process (poorly) B&W negatives.

There is a lot of information on line about how the process is done, videos, tutorials, advice in forums, however everyone must  walks his own path, sort out the obstacles of its own geographical area and work with the tools at hand.  In this post I will share with you my experience in developing my own film.

  1. The Reason

I will start with the following facts:

  • I love film and I will try to stick to it as long as possible.
  • Due to the lack of infrastructure to build my own dark room and provided that there are no accessible dark rooms in El Salvador of the digital era, I decided to scan my own negatives

My first approach was to focus on shooting and to send my negatives to a local studio to do the film development process. I did this for almost two years; however the poor results obtained on the negatives which almost always had spots, scratches or some sort of defect lead me to take the plunge and try to do my own film developing.

2.      The Learning

In short you need 3 things: the equipment, the chemicals and know the process.

A.    The Equipment

Another saying that applies to this process is “cheap is expensive”. Do not go cheap in your equipment, my poor judgment in this area cost me money and 2 or 3 films completely lost and another 4 with pictures lost, which to me is a lot given that I shot 2-3 rolls tops in a month, and a stop of one month in my development process while I got my new reel.

The equipment that I am using with good results is the following:

The loading

  • Hewes – 35mm Stainless Steel Developing Reel.
  • Kalt – Stainless Steel 35mm Tank with Plastic Cover
  • Kalt – Changing Bag Double Zipper with Elastic Arm Holes
  • Scissors
  • Cotton Cloth Gloves

Preparations

To develop film you first have to extract it from the canister and load it into a reel and then place it into a tank where the chemicals will be poured and the developing process will be performed. There are plastic and steel reels and tanks. I chose the steel version because they seemed sturdier; I have no experience with plastic tanks and reels.

If you are using a manual rewind camera such as a Leica, the first recommendation goes way back when the film is still in the camera. When you finish your roll do not rewind it until the whole film gets into the canister, you will hear a distinct sound when the film disengages form the take up spool and you will feel less resistance in the rewind knob. Then open the camera back and extract the film, it will look just as when you loaded it to the camera but a little bent in the end. If you use an auto rewind camera or you fully rewind the film then you will need a film retriever to extract the film lead from the canister, or a film cassette opener which is just like a bottle cap opener that you use to open the rear end of the canister and extract the whole film at once.

Loading Film onto the Reel

The second recommendation goes to the reels. If you chose to go with steel reels do not but any other brand but Hewes. The first time I bought generic brand steel reels and they were a catastrophe; I believe they were slightly bent and therefore could never be able to properly load a single film on them, even when I thought I had; when the reel is not properly aligned some sections of film will touch other section and those sections will be totally fogged. The steel reel needs to be well built and this quality control cost money, so save yourself some pain and frustration, not to mention your precious film and images, and buy a quality reel.

The film loading on a Hewes reel is really easy and intuitive. The things you have to keep in mind are: the reel is loaded form the center to the end border; the reel follows a direction, which from my perspective is counter clockwise: in the center there are to pins that fit exactly where the sprocket holes of the film are, following the counter clockwise sense you will see where the reel starts to take the film and goes on as a spiral, should you try to load the film in the wrong sense your film edges will bent and at some point it will be impossible to load, say goodbye to that film.

Since film loading must be done in complete darkness, it is recommended to get used to the “loading mechanics” with the lights on using some wasted film. Do it! It is better to ruin one unexposed cheap color film than a precious B&W film with the pictures of a month or an special event. Once you are used to the process then it’s time to try it in the dark.

The film loading follows these simple steps:

  • Get the film ready. Take the leading tongue outside the canister, put your cotton cloth gloves on, pull some film out of the canister and cut the lead tongue in order that you have a straight cut end.
  • Then place the film, the reel, the tank, its cap, and the scissors inside the changing bag.
  • Now grab the canister with is flat bottom facing down, grab the end and slightly bend the film towards its center and hook the sprocket holes into the two tips that the reel has in its center for said purpose, you will just feel when it happens, the film won’t go if you pull it, and it’s really easy. After you have secured the end of the film, you are good as done, pull out some film from the canister and roll it into the reel by just turning the reel counter clockwise, you don’t need to push the film it will just fall into place by turning the reel. If the film is misplaced you will feel that it goes out from the reel line borders, in such case just unroll it and roll it back in.
  • When you reach the end of the film, cut it with the scissors and then place the reel into the tank and close it tightly.

Next: The Chemicals